Написать в Max
show unit : Displays the status (Operational, Faulty, Missing) of all plug-in units.
show vlan : Displays the configured Virtual Local Area Networks (VLANs) and their associated port mappings.
Before modifying traffic parameters, verify the health of the indoor unit (AMM - Access Magazine Medium) and outdoor unit (RAU - Radio Unit or MINI-LINK 6363). Inventory and Hardware Status
Sets the microwave operating frequencies, defines the output power, and enables Adaptive Coding and Modulation (ACM) to maintain link stability during poor weather. VLAN and Interface Configuration
By default, an authenticated session drops you into standard ( > ). To modify configurations or access hidden diagnostic sub-menus, you must escalate to Privileged Exec Mode ( # ) and apply the factory engineering override.
ping [IP_address] : Tests basic layer 3 connectivity to a remote node or gateway.
: Lists all physical Ethernet ports, their administrative status, speed, duplex settings, and link state.
: Use the enable command to enter Privileged Exec mode (indicated by a # prompt), which allows for configuration changes. Essential CLI Commands
Establish a secure connection over the network using the management IP address. 2. Protocols and Default Settings
: Displays deep technical metrics of the hop, including frequency, channel spacing, and current modulation. Performance and Signal Quality
show unit : Displays the status (Operational, Faulty, Missing) of all plug-in units.
show vlan : Displays the configured Virtual Local Area Networks (VLANs) and their associated port mappings.
Before modifying traffic parameters, verify the health of the indoor unit (AMM - Access Magazine Medium) and outdoor unit (RAU - Radio Unit or MINI-LINK 6363). Inventory and Hardware Status
Sets the microwave operating frequencies, defines the output power, and enables Adaptive Coding and Modulation (ACM) to maintain link stability during poor weather. VLAN and Interface Configuration
By default, an authenticated session drops you into standard ( > ). To modify configurations or access hidden diagnostic sub-menus, you must escalate to Privileged Exec Mode ( # ) and apply the factory engineering override.
ping [IP_address] : Tests basic layer 3 connectivity to a remote node or gateway.
: Lists all physical Ethernet ports, their administrative status, speed, duplex settings, and link state.
: Use the enable command to enter Privileged Exec mode (indicated by a # prompt), which allows for configuration changes. Essential CLI Commands
Establish a secure connection over the network using the management IP address. 2. Protocols and Default Settings
: Displays deep technical metrics of the hop, including frequency, channel spacing, and current modulation. Performance and Signal Quality
