: Allows users to set different processing parameters (power, speed, frequency) for various layers within a single project. Advanced Interpolation
Go to Config -> System Config .
Upon launching, verify the language is set to English (if required). 3. The SmartCarve 43 Interface Overview The interface is structured for efficiency:
The software is typically installed in C:\Program Files\Smart Carve 43 .
Find the machine's IP address on the physical laser display screen.
– Finalizing designs, layer management (setting "cut" vs "etch" layers), and sending data to the machine. Key Features & Functions
The core control center where different colors are assigned to specific operations (e.g., Red for cutting, Black for engraving).
Check the water chiller temperature. Keep CO2 laser tubes between 18°C and 22°C (64°F–71°F).
Users with CO2 laser cutters/engravers using Leetro or similar DSP controllers. Goal: To go from installation to successful cutting and engraving.
Open the SmartCarve 4.3 utility, navigate to the equipment manager settings, add your localized Ethernet port, input the identical laser IP address, and click connect. 3. Workplace & Workspace Configurations
For most projects, you will import designs created in other software. The SmartCarve 43 manual states that the software supports importing a wide range of file formats, including: .