Foxconn N15235 Motherboard Front Panel Connectors -

Pin 5 and Pin 7 (Bottom row, right side, directly below the power switch) Function: Controls the hard reset button on your case.

The Foxconn N15235 is a micro-ATX (often proprietary layout) motherboard primarily used in OEM systems like and Acer Aspire desktops. Unlike retail motherboards, OEM boards sometimes use non-standard pinouts, making front panel connection confusing. This guide provides verified pinout data, step-by-step connection instructions, and troubleshooting tips.

The Foxconn N15235 is a compact motherboard commonly used in small form-factor desktops and all-in-one systems. This guide explains the front panel connectors (power, reset, LEDs, audio, USB) you’ll find on the board, typical pinouts, and practical tips for connecting case cables or troubleshooting common issues.

. This header is typically located in the bottom-right corner of the motherboard. Front Panel Pin Layout (FP1) foxconn n15235 motherboard front panel connectors

Here is the exact layout of the pins looking directly down at the motherboard:

You will have small 2-pin or 1-pin connectors from your case labeled accordingly. Follow these steps:

Connect this 2-pin cable to the bottom row, pins 6 and 8 (directly underneath the Power Switch pins). 3. Power LED (PLED / PWR_LED) Pin 5 and Pin 7 (Bottom row, right

This comprehensive guide breaks down the exact pinout configuration for the Foxconn N15235 front panel header, ensuring your computer powers on safely and correctly on the first try. Understanding the Front Panel Header (JFP1)

) stamped into the plastic side of the connector; this arrow always indicates the positive (

The motherboard is typically found in older OEM systems (e.g., Acer Aspire M3910, M5810, or similar desktops from around 2009–2011). Acer Aspire M3910

Before starting, disconnect your PC from the power outlet.

Comprehensive Guide to Foxconn N15235 Motherboard Front Panel Connectors Connecting the front panel cables to a Foxconn N15235

| Pin | Signal | Description | |-----|------------|---------------------------| | 1 | HDD_LED+ | Hard disk LED positive | | 2 | HDD_LED- | Hard disk LED negative | | 3 | RESET_SW- | Reset button negative | | 4 | RESET_SW+ | Reset button positive | | 5 | PWR_LED+ | Power LED positive (green)| | 6 | PWR_LED- | Power LED negative | | 7 | PWR_SW- | Power switch negative | | 8 | PWR_SW+ | Power switch positive | | 9 | NC | No connection | | 10 | KEY | Missing pin (key) |

Let us stick to the verified G31MX / N15235 standard:

If your case has a (common in Dell/HP), it will not fit directly – you must use individual jumpers or an adapter.