Stk411210e Datasheet [portable]

For 125°C max and 60W: (125 – 40)/60 – 1.5 = 85/60 – 1.5 = 1.41 – 1.5 = Negative? → Implies insufficient. So reduce output or use forced cooling.

If you suspect your STK411210E is blown (often indicated by no sound, distorted audio, or a burnt smell), here are a few tips:

Ensure your supply voltage does not exceed the maximum ratings listed in the STK411-210E datasheet. 5. Where to Buy and Find Original Components

: Built to function under ambient conditions spanning from -40°C to 105°C . Pinout Configuration and Functional Architecture stk411210e datasheet

The Sanyo STK411-210E Go to product viewer dialog for this item.

The is a classic, highly regarded two-channel thick-film hybrid audio power amplifier integrated circuit (IC) developed by Sanyo Electric Co., Ltd. (now Panasonic ). Widely implemented in consumer electronics like high-fidelity home theater receivers, mini-component stereo systems, and active subwoofers, it is known for delivering clean, high-efficiency audio power with a minimal component footprint.

A complete, verified pinout diagram is not publicly available from a first-party source. However, as a member of the STK411 series, the pinout is expected to be consistent with other SIP-18 Sanyo amplifier hybrids. The general pin functions for a typical dual-channel SIP-18 STK device are: For 125°C max and 60W: (125 – 40)/60 – 1

Unlike standard monolithic silicon amplifier ICs (such as the TDA or LM series), the relies on a proprietary thick-film hybrid layout .

The STK411-210E was a staple in mid-to-high-end home stereo systems. Notably, it is the primary audio power amplifier IC found in the mini Hi-Fi component system. Other compatible models where it was likely utilized include:

Total Harmonic Distortion (THD) is approximately 0.08% to 0.4% depending on the specific operating conditions. If you suspect your STK411210E is blown (often

Encased in a ZIP-22 (Zig-zag In-line Package) with 22 pins.

| Part Number | Notes | |-------------|-------| | STK411-200E | Lower power variant in same series | | STK411-220E | Similar power, pin-compatible | | STK411-230E | Higher power variant | | STK413-210 | Requires minor circuit modifications | | STK4191 | Known replacement with modifications |