Infineon Memtool 49 [upd] -
: 32-bit high-performance automotive MCUs, including the AURIX TC2xx and TC3xx series
The software is available via the Infineon Software Tools Portal. It requires a PC running Microsoft Windows 10 or newer.
If you want, I can:
You have two options to establish a connection with your chip: infineon memtool 49
One of its most important architectural updates in version 4.9 is its reliance on the Infineon Device Access Server (DAS) package (specifically version 7.3.5 or newer), which facilitates high-speed communication between the host PC and the target hardware. Key Features of Version 4.9
: Infineon explicitly states that Memtool should be used only for evaluation purposes, not for production or mass deployment.
: Starting with version 4.9 (specifically 2021.04), the software is a full 64-bit application and is no longer compatible with 32-bit Windows systems. Key Features of Version 4
The is a free software utility designed for programming on-chip flash and OTP memory devices for Infineon microcontrollers. It is primarily used for automotive and industrial embedded development, allowing engineers to erase, program, verify, and protect memory modules. Key Capabilities and Features
| Feature | Memtool v4.9 | Infineon Programming Tool (2024+) | |--------|-------------|-----------------------------------| | | ✅ Perfect | ❌ Not supported | | AURIX / XMC | ❌ No | ✅ Yes | | GUI | Old but works | Modern, resizable | | UART Bootloader | ✅ Yes | ✅ Yes | | JTAG/DAS | ✅ Yes | ✅ Yes | | Command line | ✅ Yes | ✅ Yes | | License | Free | Free |
: Performs a sequence of "Connect → Erase → Program → Verify" to ensure the firmware is correctly deployed to the silicon. Common Use Cases It is primarily used for automotive and industrial
Full support to Erase , Program , Verify , and Protect selectable flash sectors or entire on-chip memory blocks (both program and data flash).
The standard hardware interface hardware tool used to establish high-speed JTAG/DAP links from PC USB ports to target evaluation boards.
| Feature | Description | |:--------|:------------| | On-Chip Flash Programming | Erase entire memory module or selected sectors | | File Loading | Load Intel Hex files for programming | | Selective Programming | Program all or selected portions of the file into memory | | Verification | Compare loaded data against current flash contents | | Memory Protection | Set and reset chip/sector protection | | Boot Configuration | BMI (Boot Mode Index) configuration | | Batch Operations | Automate flash operations via batch commands | | Multi-Interface Support | DAS, UART, DAP, and JTAG protocols |
RSS- - 
