Unplug the power cable from the wall, wait 60 seconds, and plug it back in. If the box boots normally, re-download the firmware file and try the process again with a different USB drive. Loss of Channels After Update
The primary danger is that the remote control codes are stored in the firmware. If you install a different box's firmware, your original remote may stop working. Even worse, the front panel buttons on the box can become disabled, making it impossible to operate without a compatible remote. Unless you are an advanced user willing to accept the risk of permanently bricking your device, it is best to avoid cross-flashing.
Choose as the file system. Note: Formatting will erase all data on the flash drive. Click Start and wait for the process to complete.
Before you start the update process, it is critical to prepare your equipment. Verify Your Model Number: Ensure your box is strictly the ViewTV AT-163 Go to product viewer dialog for this item. . The Go to product viewer dialog for this item. is a different model. viewtv at-163 firmware update
Before starting the update process, gather the following items to avoid bricking your device:
For users whose devices continue to experience problems or who are uncomfortable with the update process, investing in a modern replacement may be the more reliable long-term solution.
Download the update file (usually a .bin file) specifically for the . Step 2: Prepare the USB Drive Connect your USB flash drive to your computer. Unplug the power cable from the wall, wait
According to user reports in forums like AVS Forum , version was a significant update released to address earlier issues with the device. Pre-Update Checklist: Before You Begin
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Before starting the update process, gather the necessary tools to avoid bricking your device: If you install a different box's firmware, your
A: First, ensure your antenna is properly connected and placed for the best reception. Try using the AT-163 by itself without any signal splitters or other devices connected, as splitters are known to reduce signal strength.
The device will locate the .bin file on your drive. Select the file and confirm the update.
Choose as the file system and click Start . Note: This will erase all data on the drive. Step 2: Download and Transfer the Firmware
: Use a Windows PC to format a USB flash drive to FAT32 . Note that Mac-formatted drives often fail to trigger the update.