To use the software with your hardware, you typically need one of the following: USB Adapter:
Set your PC's network adapter to a static IP address in the same subnet as the master (e.g., if the master is 192.168.0.250 , set your PC to 192.168.0.10 ). Scanning for Devices Open the LR Device / moneo configure software. Click on the or "Scan" icon. ifm lr device software download
The LR DEVICE software is a specialized configuration program designed for the online and offline parameter setting of IO-Link sensors, actuators, and master modules. Instead of manually navigating complex sensor menus using tiny physical buttons, LR DEVICE provides a clear, graphical user interface (GUI) on your PC. Key Capabilities: To use the software with your hardware, you
The software will scan the network subnets for ifm IO-Link masters (e.g., AL1100, AL1300 series). The LR DEVICE software is a specialized configuration
| | Possible Cause | Solution | | :--- | :--- | :--- | | Software does not start | System resources, driver conflicts | Reboot the computer. Check firewall settings; if necessary, disable it temporarily. | | "No connected device was found!" | Loose USB or Ethernet cable | Disconnect and reconnect the USB connection after 30 seconds. Restart the entire procedure. | | Limited functionality in LR DEVICE | License key is missing or not activated | Enter the LR DEVICE license key provided with your device. | | Poor or garbled display in web browser | Browser compatibility or cache issues | Use an alternative browser (Chrome, Firefox, Edge). Press F5 to refresh the browser window. | | VPN connection blocks device access | Network conflict from active VPN | Deactivate the VPN connection on your PC to allow LR DEVICE access to the device network. |
Right-click the downloaded .zip file and extract the contents to a local folder.