Erickhill Rt-100 User Manual Jun 2026

The rechargeable lithium battery provides approximately . The auto power-off feature helps extend battery life for intermittent use.

Press the AVG button to alternate between real-time average readings and the absolute maximum value recorded since powering the unit on. erickhill rt-100 user manual

Disclaimer: The information above is based on the provided Erickhill RT-100 documentation. Always read the physical manual included with the device for the most updated safety warnings. If you'd like, I can: The rechargeable lithium battery provides approximately

Move the meter around the target object to find the highest emission point. If you are scanning a large area, press the button until "VPP" shows on the screen to automatically lock and display the highest peak radiation level found. 🔋 Maintenance and Battery Charging The RT-100 is powered by a built-in 3.7V lithium battery. Disclaimer: The information above is based on the

| Problem | Possible Cause | Solution | |---------|---------------|----------| | | Battery depleted | Charge for at least 30 minutes before attempting to power on. | | Erratic readings | Nearby EMF sources or sensor interference | Move to a low-EMF area and allow auto-calibration to complete. Ensure you are not holding the device near the sensor area. | | Readings seem too low | Sensor is saturated or too close to source | Slowly approach the source from a distance of at least 30cm. Do not press the device directly against the appliance. | | Buzzer won't stop | Readings exceed alarm threshold | Either move away from the source, or disable the buzzer via long-press on the Mode button. Identify and mitigate the EMF source. | | Display shows "H" but won't update | Data Hold is still active | Short-press the Power button to cancel Hold mode before measuring again. | | Unit won't hold a charge | Battery degradation | Contact ERICKHILL customer support for battery replacement guidance under warranty. |

The RT-100 is operated using , each with dual functions depending on whether you short-press or long-press.

The RT-100 is factory calibrated. No user calibration is required for normal operation. 6. Technical Specifications Dimensions: Portable handheld design. Display: Backlit LCD.