The BCL-4562 chiller is an active refrigeration unit designed to maintain a stable temperature for fiber laser sources and cutting heads. Ideal for 1kW - 3kW+ fiber laser systems.
Safety limits protect structural frame elements from physical impact damages. The BCL 4562 handles twelve critical feedback inputs:
: Manuals for these systems cover system connection diagrams , gas and water system connections, and the calibration of capacitive height controllers.
The BCL-4562 typically uses an intelligent temperature controller (T-503 or similar Hanli controller). 4.1. Turning on the System Fill the water tank. Turn on the chiller before turning on the laser device. Check water flow rate. 4.2. Setting the Temperature The controller usually has two channels: and Optics . Laser Channel: Typically set between 25°C - 30°C. bcl 4562 manual
Ensure the chiller is grounded. Do not turn the chiller on/off frequently.
Based on technical specifications for this model, the BCL 4562 board includes: Axis Control
Modbus RTU via RS-485, Ethernet/IP, and standard CANbus profiles Package Contents The BCL-4562 chiller is an active refrigeration unit
The BCL 4562 manual is a typically included with mid-range handheld test equipment. At approximately 28–32 pages (A5 format), it attempts to balance safety, basic operation, and technical reference.
Advanced functions to locate material edges and adjust focus automatically. Manual Overview
: Visually inspect the unit for accumulation of dust or debris. Check that the ventilation paths are completely clear. The BCL 4562 handles twelve critical feedback inputs:
Locate the brand name on your device, visit the manufacturer’s support portal, and download the official PDF. Save it in a dedicated "Manuals" folder on your devices and print a physical copy to keep near your equipment.
The BCL4562 is more than just a piece of hardware; it is the central command hub of your FSCUT1000 laser cutting system. Mastering it means understanding its specifications, correctly installing and wiring it to all other system components, and effectively configuring its parameters within the CypOne software.
Improper installation voids the manufacturer warranty and presents significant electrical hazards. Always disconnect the main power grid before handling wires. Mechanical Mounting