V2ray Mikrotik Jun 2026

], "outbounds": [

Finally, we add a route that directs all traffic marked with our proxy_mark to go through the container’s gateway.

: The Container package is strictly available on RouterOS version 7 or higher.

MikroTik RouterOS does not natively run the standard V2Ray core binary (unless you use RouterOS v7 containers on compatible ARM/x86 hardware). Therefore, standard deployments typically rely on one of two architectural patterns: 1. The Transparent Proxy / Gateway Model (Recommended) v2ray mikrotik

"log": "loglevel": "info", "access": "/var/log/v2ray/access.log", "error": "/var/log/v2ray/error.log" , "inbounds": [

/interface veth add name=veth1 address=172.17.0.2/24 gateway=172.17.0.1

This command sets the container's Docker registry URL and a temporary directory for pulling images. ], "outbounds": [ Finally, we add a route

V2Ray is an open-source platform designed to build a private, secured network over an untrusted one (like the internet). It goes far beyond a simple proxy, offering a modular that supports various protocols, routing rules, and traffic obfuscation mechanisms. The modern community actively develops Xray , a more advanced fork of V2Ray, which offers improved performance and newer protocols like VLESS and REALITY.

To configure your MikroTik router as a V2Ray client, we will need to set up a virtual network for the container, define specific routes, and configure firewall rules to direct traffic through the proxy.

Follow the on-screen prompt to press the physical reset button or power cycle the router within 5 minutes to confirm. Step 2: Configure Router Networking for the Container Therefore, standard deployments typically rely on one of

For older RouterBOARDs lacking container support, you can run V2Ray on a separate Linux server (e.g., on a Raspberry Pi or Proxmox) and configure MikroTik to route traffic through it.

Replacing /path/to/your/config.json with the actual location of your file.

Although the setup process is more complex than configuring a standard VPN, the result is an incredibly powerful and self-contained system that provides security and network-wide anonymity. By starting with a container setup and methodically configuring your network rules, you can build a robust system tailored to your unique privacy and performance requirements.

Ensure the output indicates that containers are enabled. After running this command, a full power cycle (turning the router off and on again) is required for the change to take full effect.

/ip firewall mangle add chain=prerouting dst-port=80,443 protocol=tcp action=mark-routing new-routing-mark=via_v2ray /ip route add gateway=172.17.0.2 routing-mark=via_v2ray