Quectel Ec25 Change Imei (99% LIMITED)

If you want to read the IMEI specifically via the EGMR syntax first to verify it works, use: AT+EGMR=0,7 Use code with caution. Step 4: Write the New IMEI

Quectel EC25 Change IMEI: Understanding the Technicalities and Legal Risks

Applications like PuTTY, Tera Term, RealTerm (Windows), or Minicom (Linux) to send AT commands. Step-by-Step Guide to Changing the IMEI

Modifying the IMEI on a Quectel EC25 typically involves a sequence of specialized engineering commands. While standard user commands only allow reading the identifier, specific diagnostic or factory commands allow changing it. Step 1: Accessing the Diagnostic Interface quectel ec25 change imei

Depending on the firmware version loaded onto your Quectel EC25 module, the command required to rewrite the IMEI will vary. Method A: Using the AT+EGMR Command

Ensure you are sending commands to the correct COM port. The module enumerates multiple ports (AT, Diag, Modem). Only the AT or Modem ports accept configuration commands.

If AT commands fail, Quectel provides a Windows-based tool called or QFLOG . This method is riskier but works when the module is in emergency download (EDL) mode. If you want to read the IMEI specifically

Before attempting to modify the IMEI, you must establish a reliable communication interface with the Quectel EC25 module.

These uses expose the modifier to:

Ensure the printed output matches the new 15-digit IMEI you programmed in Step 3. Troubleshooting Common Errors While standard user commands only allow reading the

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

This command reads the IMEI from the primary storage. It should return a string of 15 digits.

If you have a legitimate need to restore a Quectel EC25’s IMEI (e.g., after a corrupt firmware flash), here is a general process.

Connect to the module's (usually labeled as "Quectel USB AT Port"). The default baud rate is typically 115200 . Test the connection by typing: AT Use code with caution. Copied to clipboard The module should respond with OK . Step 2: Verify Current IMEI Before making changes, document your current identity: AT+GSN Use code with caution. Copied to clipboard Response: Step 3: Changing the IMEI