Removing network locks or security codes from supported models. Verification
Plug your UFS/HWK box into a USB 2.0 port (USB 3.0 ports sometimes cause connection stability issues with older hardware). Manual Installation: Open Device Manager .
"type": "ul", "items": [ "Ensure you are using a specific software version, such as UFSx_Support_Suite_Setup_v02.03.00.07.exe, and installing the UFS_USB_Driver before running the UFS_PANEL application as an administrator.", "When you see a 'Cannot Find Server1, Continue Without?' prompt, answer 'Yes'. Then, in the UFS Control Panel, perform 'Scan Boxes', 'Check Box', and 'Update Box' in sequence. If successful, you will see a message like 'Authentication successful'.", "If the servers are partially functional, sometimes repeatedly trying the 'Check Box' and 'Update Box' buttons can eventually trigger the authentication successfully, especially with newer community-released panels like 'UFS_PANEL_2410_PR'." ] ,
⚠️ Only download from reputable sources – malware is common in repair tools.
For a permanent solution on dedicated repair PCs, you can use the Command Prompt (Admin) to run the following commands to enable Test Mode: bcdedit /set testsigning on Reboot your PC afterward. Best Practices for Running HWK UFS Software Today hwk ufs usb driver
Connect your UFS Box to a USB 2.0 port (avoid USB 3.0 ports, as they often cause timing bugs with legacy chips). Right-click the Start Menu and open .
Because HWK UFS tools are legacy software, installation requires specific steps, especially on newer 64-bit Windows operating systems.
Recovering bricked devices or fixing software-related hardware errors. Installation & Troubleshooting Tips
If you are setting up an environment to flash old phones or recover data, these strategies will save you hours of troubleshooting: Removing network locks or security codes from supported
The original UFS drivers were built for Windows XP and Windows 7 (32-bit). They lack the digital signatures required by modern 64-bit Windows operating systems. To install them, you must temporarily disable enforcement:
(UpdateClient.exe) used to synchronize the hardware with the SarasSoft Support Area Version History : Common versions include v02.09.000 and newer community-cited versions like Core Functions & Capabilities Description Reinstalling or upgrading device firmware.
| Feature | Specification | | :--- | :--- | | | USB 2.0 Full Speed | | Virtual Ports | 1 x COM Port (RX/TX) + FBUS Support | | Baud Rate | Up to 921,600 bps (typical) | | Chipset | Often FTDI-based or Proprietary | | OS Support | Windows XP - Windows 11 (Manual Install required for newer OS) | | Protocols | FBUS, M-Bus, JTAG, RX-2/TX-2 |
The microcontrollers used in older UFS boxes cannot handle the high-frequency packet structures of USB 3.0/3.1 controllers, which leads to data corruption mid-flash. "type": "ul", "items": [ "Ensure you are using
Highly problematic. Requires disabling Windows Driver Signature Enforcement and using legacy compatibility modes. Step-by-Step Installation Guide
Because SarasSoft officially discontinued support for the UFS platform years ago, finding reliable software requires navigating legacy archives. Compatible Operating Systems Windows XP (Native support, easiest installation) Windows 7 (32-bit and 64-bit)
These are the native environments for UFS boxes. Drivers are usually included in the UFS_PANEL installation folder.