It looked like this (hypothetical, for a Takumi lathe):
: Use the cursor to highlight the bit you need to change, type the new 8-bit string (e.g., 00010001 ), and press INPUT .
Phil exhaled. He touched the cold steel of the turret. “Welcome back, Goldie.” fanuc ot 900 parameter list
Always back up before changing anything! The procedure is described as:
Navigate to the 900s, input the new binary value, and press INPUT . Detailed Fanuc 0-T 900 Parameter List (Common Options) It looked like this (hypothetical, for a Takumi
Parameters 220–242 use program numbers. For example, setting parameter 220 = 6 means program 9010 will be called with every M06 programmed.
Are you trying to enable a specific feature (like DNC, Macros, or more memory)? “Welcome back, Goldie
If you tell me (e.g., Mori SL-25, Nakamura Tome TMC-20, Leadwell LTC-15) and Fanuc OT version (A/B/C), I can give you the exact 900 parameter table for that machine.
Return to the setting page and change back to PWE = 0 . Press the RESET key to clear the P/S 100 alarm.
| Bit | Name | Function | | :--- | :--- | :--- | | 0 | HLP | Help function (on-screen assistance) | | 1 | SCH | Schedule program (multi-job management) | | 2 | TAP | Tape mode editor | | 3 | LDP | Load / unload parameter (PMC ladder transfer) | | 4 | MDC | Manufacturing data capture (production counters) | | 5 | DRV | Driver monitor (servo waveform display) | | 6 | PRT | Parameter trace (diagnostic logging) | | 7 | ALM | Alarm history storage |