~repack~ | Canon G3400 Reset

Release both buttons simultaneously. The Power light will flash and then stay solidly lit, indicating Service Mode is active. Step 2: Use the Service Tool Software

Release the immediately after the 15th flash.

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

Go to (or System Preferences) and select Printers & Scanners . canon g3400 reset

the USB cable connecting the printer to your computer. Wait for exactly 60 seconds to drain residual power. Reconnect the power cable directly to the wall outlet. Turn on the printer and attempt a test print. 3. How to Reset the Wi-Fi Network Settings

While still holding the Power button, press the button exactly 5 times . Release both buttons simultaneously.

If you are moving the printer to a new office or house, or if the Wi-Fi connection is corrupted, you need to wipe the network credentials. Release both buttons simultaneously

Use this method if you are experiencing Wi-Fi connection issues or want to revert all internal settings to their original state. : Ensure the printer is turned on.

Connect your printer to your PC using a (Wi-Fi will not work). Ensure your printer is in Service Mode (see Method 1). Open the Service Tool application on your computer. Look for the Clear Ink Counter section. Set the Absorber value to Main . Click the Set button next to it.

After resetting the Canon G3400:

the Power button for 5 seconds while it is unplugged to discharge remaining electricity.

Clearing Error 5B00 (Ink Absorber Full), logic board errors, and restoring all settings to default.