Click and navigate to the folder you copied onto the USB. Select the driver (usually the first option listed). Click Next . Your SSD should now appear in the list. Alternative: BIOS Workaround
Are you doing a clean installation, or is the drive not loading in Windows? Do you see "VMD" in your BIOS settings?
For many modern laptops, including many N20C5 models, this driver is specifically tied to . When a computer's storage system is configured in RAID mode or another specialized SATA mode, Windows' basic, built-in drivers don't speak the same "language" as the hardware. This is precisely why the Acer N20C5 storage driver is so important—it bridges that gap, allowing Windows to recognize the Intel controller managing your SSD.
She wrote a detailed guide for the Acer Community forum, titled: “No such thing as N20C5 storage driver—here’s what actually works.” It became the most upvoted post of the year. acer n20c5 storage driver
The Acer N20C5 utilizes modern Intel processors (typically 10th, 11th, or 12th generation Core processors). These chipsets use a technology called , which is part of the Intel Rapid Storage Technology (RST) architecture.
If you are trying to install Windows and see an error that says "We couldn't find any drives," follow these steps from the Acer Support knowledge base :
You must download the specifically for your model from the Acer Support Page . Search by Model : Enter your Serial Number or SNID. Click and navigate to the folder you copied onto the USB
If you are trying to install Windows, format your drive, or fix a "No drive found" error on your Acer laptop, you are likely looking for the storage controller driver. The designation is the regulatory model number (RMN) for the Acer Aspire 3 (specifically the A315-58 series) and some related models.
Click and save the ZIP file to your working computer. Step 3: Extract and Transfer the Driver File
At its core, a storage driver is a crucial piece of software that acts as a translator between your computer's operating system (like Windows) and its physical hardware—specifically, your storage devices like your hard drive (HDD) or solid-state drive (SSD). Without a properly installed storage driver, your operating system literally cannot "see" your drive to install or boot from it. Your SSD should now appear in the list
When the drive selection screen appeared empty, she clicked “Load Driver,” browsed to the USB drive, and selected the folder. This time, Windows Setup paused for a moment, then displayed a message: “Intel RST VMD Controller – 9A0B (Microsoft)” .
This guide will explain exactly why this happens, how to download the correct storage driver, and how to get your drive to show up so you can complete your installation. Why Windows Cannot See Your Acer N20C5 Storage Drive
A: Boot your computer into Safe Mode. Go to Device Manager, right-click your storage controller, and select "Properties" > "Driver" > "Roll Back Driver" . If that fails, you may need to perform a System Restore to a point before the update.
Alternative: If the Acer website is unavailable, you can download the "Intel RST Storage Controller Driver with VMD" directly from Intel's official download center. 3. Preparing the Driver USB Flash Drive
“It’s not haunted,” said Marco, the hardware lead. “It’s just Windows.”