This information is provided for legacy support and troubleshooting. The Behringer BCA2000 has been discontinued for over a decade, and Behringer has not released official drivers for Windows 10 or 11. Success is not guaranteed and requires manual workarounds.
Because the driver was written for an older Windows environment, installing it directly by double-clicking the .exe will likely result in an "OS not supported" error. To bypass this, you must force Windows to install the driver in compatibility mode. Follow this exact sequence:
Navigate to: > Advanced options > Startup Settings . Click the Restart button.
Extract the contents to a folder on your desktop. behringer bca2000 driver for pc windows 10 x64 exclusive
: Right-click the setup file and select "Run as administrator" to grant necessary permissions.
: It acts as a universal ASIO driver that can often "see" the BCA2000 even if the original Behringer control panel fails to load. Availability
Look for an item marked with a yellow exclamation point labeled or "BCA2000" . Right-click the target device and click Update Driver . Select "Browse my computer for drivers" . This information is provided for legacy support and
If you are using the BCA2000 purely as a hardware control surface to automate your DAW faders, you may need a dedicated MIDI driver if the primary audio driver fails to register the control inputs.
: Windows 10 x64 requires signed drivers. If you use a modified or very old driver, you may need to Disable Driver Signature Enforcement in Windows Startup Settings to complete the installation.
Check the box at the bottom that says "Run this program as an administrator" . Because the driver was written for an older
Because Behringer officially discontinued driver development for this USB 2.0 interface during the Windows XP/Vista era, no official, native Windows 10 x64 driver exists directly from the manufacturer. However, you can still revive this powerful hardware console on modern 64-bit operating systems by leveraging advanced deployment techniques, legacy driver modification, or specialized ASIO wrappers.
It was a phantom file. It shouldn't exist. Officially, Behringer never released a dedicated Windows 10 driver for the BCA2000. But legends persist.
: Right-click the setup.exe inside the folder, select Properties , switch to the Compatibility tab, check Run this program in compatibility mode for , and choose Windows XP (Service Pack 3) or Windows 7 . Also check Run as Administrator .
For some users, this method is all that's needed to get the BCA2000 operational on Windows 10. If not, move on to Method 2.