Used to prevent over-discharging. The relay connects the load to the battery when the voltage is high enough ( UP ) and cuts the power when the battery drops to the lower limit ( dn ) to protect the cells. 2. Technical Specifications XY-CD60 Lithium Battery Charge Controller ... - ICStation
Connect to your Load (Discharging Mode) or Charger (Charging Mode).
For the most detailed, up‑to‑date information, refer to the manufacturer’s documentation.
Members of online forums and technical discussion groups provided some insights into the possible uses and significance of the "xycd60 manual": xycd60 manual
The wiring is straightforward: The module has clearly labelled input and output terminals.
| Specification | Details | | :-------------------------------- | :------------------------------------------- | | | XY‑CD60 / XY‑CD60L | | Supply Voltage | DC 6 – 60 V | | Maximum Load Current | 10 A (intermittent), 6 A (continuous) | | Voltage Measurement Accuracy | ±0.1 V | | Relay Type | SPDT mechanical relay | | Power Consumption | ~250 mW (30 mA operating) | | Operating Temperature | -40℃ to +85℃ | | Operating Humidity | 0% ~ 95% RH | | Module Dimensions (L×W×H) | 79 × 43 × 27 mm (3.11 × 1.69 × 1.06 in) | | Panel Cut‑out Dimensions | 71.3 (L) × 39 (W) mm |
XY-CD60 Solar Battery Charge Controller Module - RoboFactory Used to prevent over-discharging
Long press the DOWN button to toggle the backlight sleep mode. "On" keeps the light on; "OFF" turns the light off after 5–10 minutes of inactivity. Safety Precautions
As I looked down at my hands, I realized they were no longer human. I was one of them now, a being capable of transcending the boundaries of species, of time, and of space. The manual, it seemed, was not a guide but a catalyst.
Used to prevent overcharging. The relay connects the charger to the battery when the voltage drops to the lower limit ( dn ) and disconnects once it reaches the upper limit ( UP ). Members of online forums and technical discussion groups
: If the voltage exceeds settings, the relay will disconnect. Always ensure your charger voltage matches your battery system (e.g., use a 24V charger for a 24V battery) as the module does not change the voltage; it only acts as a switch.
Ensure correct polarity. Connecting the battery backward can damage the module. The input and output negative poles are linked, but the positive poles are separated by the relay [as per Scribd User Manual]. 6. Functional Operations (Button Functions)
The XY-CD60 uses an onboard relay to pass or sever power lines. It must be wired differently depending on your intended target application. 1. Charging Control Mode Wiring ( IN )
Congratulations on acquiring the Xycd60, a state-of-the-art device designed to simplify your daily tasks. This manual is intended to provide you with a thorough understanding of the Xycd60's features, operation, and maintenance.
Initial searches for the "xycd60 manual" yield limited results, with most online platforms and databases failing to provide any concrete information. It appears that the manual is not widely available or referenced in mainstream online communities. However, a few niche forums and specialized discussion groups seem to hint at its existence, describing it as a technical document related to a specific device or system.