No native NVMe or M.2 slots are available. Storage upgrades are strictly limited to 2.5-inch SATA SSDs or 3.5-inch HDDs. Rear I/O Panel and Internal Connectivity
A common, reliable upgrade for this board is the NVIDIA GT 1030 2GB GDDR5 or similar low-profile cards.
The FXN1 E93839 is optimized for Sandy Bridge and Ivy Bridge architectures. Users typically pair it with mid-to-high performance CPUs of that era: Intel Core i3, i5, and i7. Specific Examples: i7-3770, i5-2400, and i3-2100.
Intel Q270 (typically found in the G3 series of HP business desktops) hp fxn1 e93839 motherboard specs
This guide covers the technical specifications, compatibility, and upgrade options for the HP FXN1 E93839 motherboard. Technical Specifications: HP FXN1 E93839 Motherboard
Standard retail power supplies feature a 24-pin ATX connector. Because this HP motherboard utilizes a , you cannot directly plug an aftermarket PSU into it. To upgrade the power supply (e.g., to power a high-end graphics card), you will need a specialized 24-pin to 6-pin ATX power adapter cable explicitly built for HP motherboards. 2. Case Transplants (PC Case Compatibility)
"Does it have the basics?" Mia asked. "SATA? USB?" No native NVMe or M
The FXN1 offers a reasonable selection of ports for its era.
1x DisplayPort and 1x VGA port (for integrated Intel HD Graphics) Audio jacks (Line-In, Line-Out, Microphone) PS/2 mouse and keyboard ports (on select legacy models) Important Compatibility and Proprietary Constraints
1066 MHz, 1333 MHz, or 1600 MHz (Speed scales down depending on the installed CPU). Maximum Capacity: 16 GB total (2 x 8GB modules). Expansion Slots and Storage The FXN1 E93839 is optimized for Sandy Bridge
The standoff alignment may not perfectly align with standard cases.
Windows 10 (64-bit) is fully functional with available drivers. Windows 11 is not officially supported due to the lack of a TPM 2.0 module, though some users have bypassed this restriction. Linux distributions (Ubuntu, Debian) typically install without issue.
If you are planning to purchase this motherboard for a custom PC build or use it as a replacement part, you must be aware of its proprietary design limitations. 1. Proprietary Power Connectors
HP FXN1 E93839 Motherboard Specs: A Comprehensive Guide The is an OEM (Original Equipment Manufacturer) motherboard produced by Foxconn for Hewlett-Packard . It primarily populates HP’s budget-friendly, small-form-factor (SFF) and microtower business desktop lineups, such as the ProDesk and EliteDesk series. Because it is a proprietary board designed for mass-production prebuilt systems, finding official retail documentation can be difficult.