Prosecure Opti Combi Manual English Info
The of your ProSecure Opti Combi sensor (e.g., standard, monitored, or specific brand-labeled version)?
The sensor will click, the LED will turn solid green, and the new floor baseline layout is saved. 6. LED Diagnostic Codes and Troubleshooting
ON / OFF: Toggles between Frequency A and Frequency B to prevent cross-talk interference when two sensors are mounted back-to-back on the same door. OFF: 30-second presence detection limit. prosecure opti combi manual english
Determines how long the door stays open if someone stands still in the threshold (e.g., 30s, 1 min, or infinite). Frequency:
Remove the sensor cover by releasing the retaining tabs (usually located at the bottom or sides of the casing). The of your ProSecure Opti Combi sensor (e
Swap the internal radar lens. The standard lens creates a wide pattern, while turning the lens 90 degrees or swapping to a narrow lens focuses the field directly on narrow corridors. Infrared Safety Field Adjustments
Standard wiring for the Prosecure Opti Combi typically follows this color-coded configuration: : Power supply (Ground). Brown (+) : Power supply ( Green (-) : Microwave module output (Activation zone). Yellow (+) : Microwave module output. Grey (-) : Test input. Pink (+) : Test input. Blue (-) : Infrared module output (Safety zone). Red (+) : Infrared module output. LED Status Indicators The sensor's LED provides immediate feedback on its status: Solid Green : Device is ready for operation. Solid Red : Detection is active (motion or presence). Flashing Green : A remote command has been received. Flashing Red : A fault has been detected. Flashing Red/Green : Initializing after power-on. Configuration & Adjustments LED Diagnostic Codes and Troubleshooting ON / OFF:
Check wiring harness, terminal connections, and door controller power supply output. Normal Standby Mode System operational; door is closed; no detection. Flashing Green Radar Detection Motion detected; activation signal sent to open the door. Solid Red IR Presence Detection Safety curtain triggered. Door remains open or reverses. Flashing Red (Slow) Background Error
Every time a setting is altered or the physical environment changes, you :
