Foneso F100 User Manual Work

stops working or throws an error code, use this quick diagnostic guide to restore operation:

±3 millimetres under optimal conditions

: To conserve power, the primary laser turns off after 30 seconds of inactivity, and the entire device automatically shuts off after 150 to 180 seconds of no button input. 3. Adjusting the Measuring Reference Edge

Received signal is too strong (the laser reflects blindingly back). foneso f100 user manual work

: To start the meter, hold the power/measure key. The laser and display will activate simultaneously. To turn it off, hold the OFF key for 3 seconds. Automatic Shut-off

: Laser turns off after 1 minute; instrument turns off after 10 minutes Expected Battery Life : >15,000 individual measurements Basic Device Operation & Keypad Layout

Point the laser at the first wall and press to record the length. stops working or throws an error code, use

: Pull the phone holder upward and rotate it to your desired angle (landscape or portrait). Most clamps fit phones with a width between 56mm and 89mm .

A: Press Power + Volume Down simultaneously for 2 seconds. For keypad model, press * + # together.

Since the printed manual is limited, bookmark these: : To start the meter, hold the power/measure key

: If your remote is rechargeable, plug it into a power source using the provided micro-USB cable. The light usually turns off once fully charged. Laser Distance Measurer (Alternative Model)

The Foneso F100 is typically powered by .

: Hold the base of the stick and pull the three legs outward until they lock into place. Ensure the legs are on a flat surface for stability.