Yamatake Sdc20 User Manual !!top!! Jun 2026

The control output type is indicated by the model suffix letter:

Fix: Perform a factory reset and re-enter parameter maps. If error persists, replace the hardware unit.

See Table 4.2 "Parameter List" – it lists every code with its factory default and value range.

Before wiring the unit, ensure all power sources are disconnected to prevent electrical shock or equipment damage. yamatake sdc20 user manual

If your PC cannot communicate with the SDC20 via the loader port:

Change the value from 0 (Off) to 1 (On) using the Up arrow key.

Define whether you are using a thermocouple (K, J, etc.), RTD (Pt100), or linear input. Engineering Units: Select ∘Craised to the composed with power C ∘Fraised to the composed with power F The control output type is indicated by the

The user manual stresses proper installation to prevent malfunction or damage.

±0.3% of full scale (for most thermocouple and RTD ranges).

: For advanced configuration, the SLP-C20 software package can be used to set up parameters via a PC. Manual Resources Before wiring the unit, ensure all power sources

Must be panel-mounted to restrict operator access to the rear terminals for safety.

The user interface consists of dual digital displays and four functional tactile keys.

Comprehensive but dense – essential for setup, not for beginners Rating: ★★★★☆ (4/5)

If you need help resolving a specific error or mapping out a physical application, tell me:

The is a compact digital indicating controller designed for precise process control in general machinery and industrial applications. This guide summarizes the core operational and technical details found in the official user manual. 1. Key Specifications and Operating Conditions