Click in the top menu bar, then select Add legacy hardware .
Press and hold the (usually the Center Menu button or the Call/Green button for RM-1035). Plug the USB cable into the PC while holding the key.
Because the Nokia RM-1035 uses a legacy MTK infrastructure, installing the driver requires manually adding it as legacy hardware via the Windows Device Manager. Step 1: Disable Windows Driver Signature Enforcement
Windows 7, 8, 10, or 11 (64-bit variants). Nokia Rm-1035 Mtk Usb Driver 64 Bit Gsm Forum
The most recommended and modern solution is the all-in-one . This package is frequently updated and includes drivers for all Nokia device series, including those with MediaTek chipsets like your RM-1035.
Ultimate Guide to Downloading Nokia RM-1035 MTK USB Drivers for 64-Bit Windows
Upon reboot, press or F7 on your keyboard to select "Disable driver signature enforcement." Click in the top menu bar, then select Add legacy hardware
This comprehensive guide covers everything you need to know about downloading, installing, and troubleshooting the Nokia RM-1035 MTK USB driver on 64-bit operating systems. Why You Need the Nokia RM-1035 MTK Driver
Choose from the list, click Next , and confirm the installation when Windows prompts you with a red warning box. Popular Servicing Actions on GSM Forum
: These MTK drivers are primarily for flashing and repair (using tools like Infinity BEST) rather than standard mass storage file transfers. For simple file transfers, the device should work with standard Windows drivers by selecting "Mass storage" on the phone menu. Because the Nokia RM-1035 uses a legacy MTK
), you must , reinsert it, hold down the Center/OK key (or sometimes the * key), and plug in the USB cable simultaneously.
For users who want to download the driver, this specific version can be found by searching for the file name on reliable sites dedicated to GSM (Global System for Mobile) solutions, as listed in the search results provided.
Since the MTK drivers are old, they lack up-to-date Microsoft signatures. Windows 10 and 11 block unsigned drivers by default, so you must disable this requirement: