Digi - Edgeport 1 Driver Windows 10 64 Bit

: Recent updates fixed enumeration issues when the device is attached to USB 3.0 Host Controllers. Digi International Edgeport/1 Device Hardware Features

How to install the Edgeport driver in Windows - Digi International

After some digging, I found the correct working driver. Here’s the fix: digi edgeport 1 driver windows 10 64 bit

To ensure stable operation on a 64-bit architecture, you must use the correct driver version. The most current and widely recommended version for Windows 10 is . Driver Version: 6.05 (latest)

Unplug the Edgeport/1 from your USB port. : Recent updates fixed enumeration issues when the

device must remain unplugged from the PC during the entire execution phase of the installer . If you connect the hardware early, Windows 10 will apply a generic hub fallback driver, resulting in empty COM maps. 1. Pre-Installation Setup

After the installation and system reboot, you need to confirm Windows recognizes the device as a COM port. The most current and widely recommended version for

Do NOT have the device plugged into your USB port when you start.

Launch the application. It will display an overview of all connected Edgeport devices. Select your Edgeport/1 from the list and click .

: Obtain the current 64-bit setup package (e.g., 40002537_6.05_N.exe ) directly via the Digi Knowledge Base.