Slide the bolt assembly and recoil spring out from the back of the receiver.
Zk-pp2k Manual, ZK-PP2K, fingerprint time clock, ZKTeco setup, attendance terminal troubleshooting, enroll users, download logs, factory reset, error codes.
Safe mode. The trigger is mechanically blocked. Loading Gas and BBs
+-----------------------------------+ | ZK-PP2K | | | | [ VIN+ ] [ VIN- ] [ OUT+ ] [ OUT- ] +------+--------+---------+---------+ | | | | | | | | (Power +) (Power -) (Load +) (Load -) Terminal Descriptions Positive power supply input (3.3V - 30V). VIN-: Negative power supply input (GND). OUT+: Positive load output connection. Zk-pp2k Manual
is a high-power PWM signal generator and motor driver capable of directly driving loads up to (150W). Its standout feature is its
Kael reached into his trench coat. Elias flinched, expecting a weapon. Instead, Kael pulled out a small, crumpled data-chip. He tossed it onto the workbench.
This is the core of the "PP2K" integration. Slide the bolt assembly and recoil spring out
Duration the signal stays high (0.000s - 9999s).
: Ideal for controlling stepper motor steps or specific timing sequences. Technical Specifications
Turn the screw clockwise.
Time elapsed before pulses start (0.000s - 9999s).
A shadow fell over the workbench.
He ejected the magazine, checked the feed ramp, and slammed it back home. He flipped the safety off, then on. The lever clicked crisply. The trigger is mechanically blocked
PULSE mode gives you fine control over individual pulse waveforms, down to the millisecond. Hold for 6 seconds until the "%" icon clears.
Understanding the hardware limits ensures safe and accurate operation. DC 3.3V to 30V Frequency Range: 1Hz to 150kHz Frequency Accuracy: ~2% accuracy across all ranges Duty Cycle Range: 0% to 100% Output Current: Driving capacity around 30mA Pulse Count Range: 1 to 9999, or infinite Delay Time Range: 0.000s to 9999s 🕹️ Device Layout and Interface