Solar Camera Yn88-wifi Manual ⟶ (Fresh)

Both you and the invited user can control camera settings, but the password can be viewed but not modified by guests.

This camera uses a "Wake on Motion" system to save battery. It sleeps until the PIR sensor detects heat movement.

Even with solar power, give the internal battery a full charge using the USB cable before installation. This ensures smooth initial pairing. solar camera yn88-wifi manual

The YN88 accepts microSD cards up to . Cards are not included in the box.

If you want, I can:

typically uses the app or YCC365 Plus app, depending on the firmware version.

| Error Indicator | Solution | |----------------|----------| | Blue light slow blink | AP mode error. Reset camera, enable “AP Mode” in app (tap “Other Mode” during pairing). | | Voice says “Wi-Fi password wrong” | Check for special characters. Use simple password temporarily. | | Connection times out | Move camera within 3 meters of router during setup; disable router’s “Mesh” or “Band Steering”. | Both you and the invited user can control

Enter your home Wi-Fi name and password into the app.

Customize the camera name (e.g., "Backyard" or "Driveway") to finish the setup process. 5. Mounting & Physical Installation Even with solar power, give the internal battery

Open the silicon flap on the device to insert a microSD card (for local storage) and ensure the power switch is in the 'On' position.

Infrared (IR) LEDs for black-and-white night vision, alongside white floodlights for full-color night viewing.