Most modern systems use NBT to allow legacy NetBIOS applications to communicate over modern IP networks. You can enable this in the Advanced TCP/IP settings of your network adapter.
If networking fails, utilize a USB stick (or floppy, if necessary) to bridge the files between machines.
It is incredibly fast on small, local subnets because it doesn’t waste time routing packets outside the local network.
For Windows 10 and 11 setups that absolutely require raw non-routable packet handling, third-party encapsulation is the most reliable modern solution. netbeui+for+windows+7+11+exclusive
Place netnbf.inf into the C:\Windows\inf\ directory (Note: This is a hidden folder by default).
Run a virtualized instance of Windows XP (using Oracle VirtualBox or VMware ) on your Windows 7/11 host. You can then install NetBEUI inside the VM to act as a bridge to your legacy equipment.
Open ncpa.cpl (Network Connections) by typing it into the Start menu. Right-click your Local Area Connection -> . Most modern systems use NBT to allow legacy
NetBEUI is chatty. If you see "duplicate computer name," check that your NIC binding is strictly set to the legacy network.
Since Windows 11 and 64-bit systems will often blue screen or fail to recognize these legacy drivers, virtualization is the most reliable "exclusive" method to maintain NetBEUI connectivity. Solved: Using Netbeui in Windows 7 - Experts Exchange
Modern Windows versions will not find NetBEUI in their default list of protocols. You must "force" the installation. It is incredibly fast on small, local subnets
If you're looking for exclusive NETBEUI solutions for Windows 7 and Windows 11, here are some recommendations:
Windows 10 (1607 and later) removed legacy NetBIOS framing APIs. Direct INF installation fails. However, the exclusive workaround is to use a with NETBEUI bindings via a Windows XP Mode VM bridge.
Place netnbf.inf into %SYSTEMROOT%\Inf (this is a hidden folder). : Go to Network and Sharing Center > Change adapter settings . Right-click your connection and select Properties . Click Install > Protocol > Add . Select NetBEUI from the list (if it appears).
Ensure NetBEUI is only bound to the network interface card (NIC) connected to the legacy machinery. This prevents it from polluting your main network traffic.